!xmodmap--compact--apple-a1243
! xmodmap--compact--apple-a1243
!
Reference:
! A buttonboard layout with one button per letter
! of the English (U.S.) alphabet, and four symbols
! per button. Two layout buttons, "lower" and "right",
! provide access to all four layouts of the presumed
! 2x2 matrix (Diagram for typing symbols).
!
! Spacing and deleting is handled by the left thumb
! (Diagram for spacing and deleting).
!
! Movement and placement is handled by the right thumb
! (Diagram for placing content).
! Ideally, there would be one button per layout
! for activating each rather than temporarily switching.
! The Xserver and the programs depending on it seem to be
! without that support (StumpWM and the X Window System).
!
! Perhaps that will be overcome by StumpWM (SBCL) becoming
! either an Xserver, or as a Wayland compositer,
! or as the kernel itself.
!
#buttonboard model
! For an Apple buttonboard.
! Model No.: A1243 EMC No.: 2171
! 109 buttons
!
! Very odd physical design, and peculiar failures when
! holding multiple buttons. The modifier buttons are
! wide enough for thumbs, as if the hands were meant
! to be crossed, wrist on top of wrist. Perhaps so,
! then the palm could press that extra wide barbutton.
!
! It also has movement buttons and an extra set
! of number buttons.
!---------------------------------------------------------.
!esc|F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12|ejt|
!---^-------------------------------------------------^---|
! ` 1 2 3 4 5 6 7 8 9 0 - = | del|
!---------------------------------------------------^-----|
!tab | q w e r t y u i o p [ ] \ |
!-----^---------------------------------------------------|
!caps | a s d f g h j k l ; ' |return|
!------^-------------------------------------------^------|
!shift | z x c v b n m , . / | shift|
!--------^---------------------------------------^--------|
!ctrl |opt |comm | barbutton | comm| opt| ctrl|
!-----^----^-----^-----------------------^-----^----^-----'
! All keycodes as understood by an Xserver (8-255),
! which are merely offset by +8 from Linux console.
! Second keycode is while holding the Fn button,
! which is keycode 464 in the console.
!
!---------------------------------------------------------.
! 9 |232 233 128 212 237 238 173 172 171 121 122 123|169|
! | 67 68 69 70 71 72 73 74 75 76 95 96| |
!---^-------------------------------------------------^---|
! 49 10 11 12 13 14 15 16 17 18 19 20 21| 22|
! | 119|
!---------------------------------------------------^-----|
!23 | 24 25 26 27 28 29 30 31 32 33 34 35 51|
!-----^---------------------------------------------------|
!66 | 38 39 40 41 42 43 44 45 46 47 48| 36|
! | | 118|
!------^-------------------------------------------^------|
!50 | 52 53 54 55 56 57 58 59 60 61| 62|
!--------^---------------------------------------^--------|
!37 |64 |133 | 65 | 134| 108| 105|
!-----^----^-----^-----------------------^-----^----^-----'
!
#buttonboard circuit failures
! Failures when holding buttons
! before typing final button.
!
! v + 4 = success v + m + 4 = nothing
! v + r = success v + m + r = nothing
! v + f = success v + m + f = nothing
!
! For this buttonboard, buttons other than
! modifier buttons are limited as modifiers.
! A whole column becomes unresponsive while holding
! two other buttons, though it will likely depend on
! the row and column of the held buttons.
!
! Likely the common limit of an efficiently designed
! buttonboard circuit rather than infinitely designed.
!
! Consider assigning keysyms to the other buttons
! in the same column with no need of that button
! as their modifier, or depend on the buttons
! intended as modifier buttons instead.
! It seems like both of the same modifier buttons
! assigned with different modifier keysyms
! fail when both are held.
!
! Option_L + Option_R + a = nothing
! Shift_L + Shift_R + q = nothing
! Control_L + Option_R + a = success
! Control_L + Option_R + q = success
!
! Both Option buttons combined with any button
! from "a" to apostrophe fail.
! Both Shift buttons combined with any button
! from "q" to "[" fail.
! However, the left Control combined with
! the right Option work with both of those rows.
!
! Consider assigning a modifier lock keysym to the
! other modifier button, hence no need for holding it.
!
#diagrams
! Four fingers means four buttons in a row.
! One row above and one row below means three rows.
! Twelve buttons per hand means 24 buttons total.
!
! There are usually 47 buttons with symbols,
! two per button. Two "shift" buttons for
! the other half, but only one needed.
!
! As that is almost twice as many as 24, four symbols
! per button encompasses all. Two "shift" buttons
! can suffice for three additional layouts by holding
! both for the third.
!
! Consider StumpWM commands for locking a layout button
! by sending the Xserver a "press" key-event for one
! without a "release" key-event. Actual typing of the
! corresponding layout button would release its lock.
! Ensure the layout lock buttons are always available
! by defining them in a "primary" keymap listed prior
! to the StumpWM *top-map*.
! Consider having four symbols per button in a
! 2 by 2 matrix, the one at left-top as default.
!
! default right
! lower lower-right
!
! The layout buttons, t.i. "shift" buttons,
! are "right" for the symbol right of the default,
! "lower" for the symbol below the default,
! and both for the lower-right symbol.
!
#diagram of buttons for typing symbols
! Letters are listed in familiar alphabetical order
! from left to right and then top to bottom,
! the same as when writing and reading. Add two more
! buttons outside the forefingers for "y" and "z".
! Small letters are the default layout and their
! capitals are a separate layout, as usual.
!
! Numbers are sequential as when counting,
! and familiarly arranged as on phones and ATMs.
! The ten digits are grouped within the twelve buttons
! of the right half, with the minus, plus, and period.
! esc F1 F2 F3 F9 F10 F12 eject
! --- --- --- --- --- --- --- -----
! a ( b ) c [ d ] e 1 f 2 g 3 h -
! A { B } C < D > E \ F / G * H =
!
! ` 1 2 3 4 9 0 - = DEL
! --- --- --- --- --- --- --- --- --- ---
! i " j , k ʻ l ¿ y ? z 0 m 4 n 5 o 6 p .
! I ¨ J ¸ K ¯ L ¡ Y ! Z # M & N | O @ P :
!
! tab q w e p [ ] \
! --- --- --- --- --- --- --- ---
! q ` r ~ s ^ t ' u 7 v 8 w 9 x +
! Q ` R ~ S ^ T ´ U _ V $ W % X ;
! The ʻokina consonant and the kahakō accent (macron)
! are the right half of "k".
!
! Composition with the accent for
! umlaut (diaeresis), cedilla,
! grave, tilde, circumflex, acute
! are with the traditional mnemonic symbols that were
! combined with an AltGr or Compose button:
! double-quote, comma,
! backtick, squiggly, caret, apostrophe
! That is from the lower-right of: i, j, q, r, s, t.
!
! Composition of the circumflex accent with a digit
! results in an exponential (superscript): ⁰¹²³⁴⁵⁶⁷⁸⁹.
!#diagram of buttons for spacing and deleting
! The left thumb is for spacing and deleting.
!
! The left thumb rests comfortably on the gap
! at the 4-way intersection of the buttons for
! space, the view management with StumpWM,
! and the "lower" layouts.
!
! That has also helped with locating by feel,
! and the sound of the barbutton when jostled.
! s d
! ------- -------
! delete delete
! -left -right
!
! z x c
! ------- ------- -------
! Return | space
! v nobreak
! --> <--
! Command L ^ barbutton
! ------------- | -----------------
! "lock lower" "view management"
! StumpWM expects Return instead of Linefeed
! for finalizing its prompts.
!
! The forward delete ("Delete") seems
! unavailable when Shift is active.
!
! The x button was accidentally typed too easily.
! Ideally, it would activate the left-top buttonmap.
!
! The "nobreakspace" is less accidental
! with "lower" rather than "right".
!
! The "lower" layout button is Mode_Switch,
! at left Command. There seems to be no lock
! supported for Mode_switch.
!#diagram of buttons for placing content
! The right thumb is for placing the
! text insertion point or the viewed content.
!
! The right thumb rests comfortably on the gap
! at the 4-way intersection of the buttons for
! Left, Right, the "right" layouts, and the
! view management with StumpWM.
!
! That has also helped with locating by feel,
! and the sound of the barbutton when jostled.
! l ;
! ------- -------
! Up Down
! Prior Next
!
! , . / Shift R
! ------- ------- ------- -------
! Left | Right Tab "lower"
! Home v End
! --> <--
! barbutton ^ Command R
! ----------------- | -------------
! "view management" "lock right"
! The Home, End, Prior, and Next keysyms are typically
! ineffective in programs when Shift is active.
! Therefore, the right Shift is a second "lower" button
! for content navigation with one hand while reading
! rather than writing.
!
! The Tab is a capitulation for hyperlink navigation
! or text completion. The Tab as a typed character
! is for substitution matches, f.e. spaces or deletion,
! because it has been phased out of personal workflows.
!
! The Tab is available without the Shift modifier,
! otherwise it automatically becomes "ISO_Left_Tab"
! in some programs.
!
#diagram of buttons for commands
! Option Command barbutton Command Option
! ------ ------- ------------- ------- -------
! Alt "lock "view "lock Control
! lower" management" right"
! A keysym or means for locking group 2 was unknown
! at the time. A sequence of capitalized letters
! has been rare compared to a number sequence.
! Therefore, the numbers layout is with Shift_Lock,
! and capital letters are with Mode_switch.
!
! The barbutton is Escape for the "top maps"
! of StumpWM, such as for stumpwm::*escape-key*.
! Escape is the default for canceling a prompt,
! so having it as the StumpWM "top maps" button
! helps it feel like a toggle button.
!
! Phasing out the Control keysyms in personal
! workflows. Probably need only C-x for emacs.
! Essentially, only the small letters are relevant.
! Might also be useful with other computers (VNC).
!
! Phasing out the Alt keysyms in personal workflows.
! The Alt button toggles the menubar of a program,
! then type the underlined letter for a menu
! or for one of its commands.
! Might also be useful with other computers (VNC).
!
! The Super keysyms are unneeded for the moment.
! Might be useful with other computers (VNC).
!
#keycode assignment
! Remap the whole buttonboard. Unassign all unneeded
! buttons in order to prevent mistyping.
!
#clear modifier groups
! Empty all eight modifier groups in advance.
!
! Consider unassigning modifier symbols for
! pre-assigned keycodes of nonexistent buttons.
clear shift
!keysym Shift_L =
!keysym Shift_R =
clear lock
!keysym Caps_Lock =
! Shift_Lock is already without any buttons.
!keysym Shift_Lock =
clear control
!keysym Control_L =
keysym Control_R =
clear mod1
clear mod2
clear mod3
clear mod4
clear mod5
!keysym Alt_L =
!keysym Alt_R =
keysym Mode_switch =
!
#symbols for row 1
! Row 1:
! esc (9), F1-F12, eject (169)
!
! F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12
! --- --- --- --- --- --- --- --- --- --- --- ---
! 232 233 128 212 237 238 173 172 171 121 122 123
! Left hand: top row.
keycode 9 = a parenleft A braceleft
keycode 232 = b parenright B braceright
keycode 233 = c bracketleft C less
keycode 128 = d bracketright D greater
! Unassigned
keycode 212 =
! Only F1, F3, and F4 have been useful, f.e. Emacs.
! Re-assign to the primary F5-F8 keycodes.
keycode 237 = F1 F1 F1 F1
keycode 238 = F2 F2 F2 F2
keycode 173 = F3 F3 F3 F3
keycode 172 = F4 F4 F4 F4
! Right hand: top row.
! The F10 button was too far left for the forefinger.
! The F11 button was awkward for typing, but might be
! convenient as the Alt button for toggling a menubar.
keycode 171 = e 1 E backslash
keycode 121 = f 2 F slash
keycode 122 = Alt_R
keycode 123 = g 3 G asterisk
keycode 169 = h minus H equal
!
#symbols for row 2
! Row 2
!
! ` 1 2 3 4 5 6 7 8 9 0 - = delete
! -- -- -- -- -- -- -- -- -- -- -- -- -- ------
! 49 10 11 12 13 14 15 16 17 18 19 20 21 22
! Left hand: middle row.
keycode 49 = i quotedbl I dead_diaeresis
keycode 10 = j comma J dead_cedilla
! The ʻokina consonant is Unicode hexadecimal "02bb".
keycode 11 = k U02bb K dead_macron
keycode 12 = l questiondown L exclamdown
keycode 13 = y question Y exclam
! Unassigned
keycode 14 =
keycode 15 =
keycode 16 =
keycode 17 =
! Right hand: middle row.
keycode 18 = z 0 Z numbersign
keycode 19 = m 4 M ampersand
keycode 20 = n 5 N bar
keycode 21 = o 6 O at
keycode 22 = p period P colon
!
#symbols for row 3
! Row 3
!
! tab q w e r t y u i o p [ ] \
! --- -- -- -- -- -- -- -- -- -- -- -- -- --
! 23 24 25 26 27 28 29 30 31 32 33 34 35 51
! Left hand: bottom row.
keycode 23 = q grave Q dead_grave
keycode 24 = r asciitilde R dead_tilde
keycode 25 = s asciicircum S dead_circumflex
keycode 26 = t apostrophe T dead_acute
! Unassigned
keycode 27 =
keycode 28 =
keycode 29 =
keycode 30 =
keycode 31 =
keycode 32 =
! Right hand: bottom row.
keycode 33 = u 7 U underscore
keycode 34 = v 8 V dollar
keycode 35 = w 9 W percent
keycode 51 = x plus X semicolon
!
#symbols for row 4
! Row 4
!
! cap a s d f g h j k l ; ' return
! --- -- -- -- -- -- -- -- -- -- -- -- ------
! 66 38 39 40 41 42 43 44 45 46 47 48 36
! Unassigned
keycode 66 =
keycode 38 =
! Left thumb: top row.
keycode 39 = BackSpace BackSpace
keycode 40 = Delete Delete
! Unassigned
keycode 41 =
keycode 42 =
keycode 43 =
keycode 44 =
keycode 45 =
! Right thumb: top row.
keycode 46 = Up Up Prior Prior
keycode 47 = Down Down Next Next
! Unassigned
keycode 48 =
keycode 36 =
!
#symbols for row 5
! Row 5
!
! shift z x c v b n m , . / shift
! ----- -- -- -- -- -- -- -- -- -- -- -----
! 50 52 53 54 55 56 57 58 59 60 61 62
! Unassigned
keycode 50 =
! Left thumb: middle row.
! The x button was accidentally typed too easily.
! Ideally, it would activate the left-top buttonmap.
keycode 52 = Return Return Return Return
keycode 53 =
keycode 54 = space space nobreakspace nobreakspace
! Unassigned
keycode 55 =
keycode 56 =
keycode 57 =
keycode 58 =
! Right thumb: middle row.
keycode 59 = Left Left Home Home
keycode 60 = Right Right End End
keycode 61 = Tab Tab Tab Tab
! The second "lower" layout button, at right Shift.
keycode 62 = Mode_switch
!
#symbols for row 6
! Row 6
!
! ctrl opt comm barbutton comm opt ctrl
! ---- --- ---- --------- ---- --- ----
! 37 64 133 65 134 108 105
! Unassigned
keycode 37 =
! Assign the left Option button as the only Alt.
! Nevermind. F11 is more convenient (Row 1).
!keycode 64 = Alt_L
keycode 64 =
! The "lower" layout button, at left Command.
keycode 133 = Mode_switch
! The "view management" button for StumpWM,
! at the barbutton.
keycode 65 = Escape Escape Escape Escape
! The "lock right" layout button, at right Command.
keycode 134 = Shift_Lock
! Assign the right Option button as the only Control.
! Easy to hold with thumb for any small letter.
keycode 108 = Control_R
! Unassigned
keycode 105 =
!
#secondary keycode assignment
! Simpler console terminal switching.
! Still the secondary keycodes for the F# buttons,
! but without the Control-Alt modifiers.
! There is just one VT on piCore, by default.
keycode 67 = XF86Switch_VT_1
!
#extra buttons
! Unassign the left arrow button because the right hand
! sometimes rests on it.
keycode 113 =
!
#add to modifier groups
add lock = Shift_Lock
add control = Control_R
add mod1 = Alt_R
! Need "Mode_switch" (or its alias) for the button
! that is held for programs abiding the X11 protocol.
! Need "ISO_Level3_Shift" (erroneously) added
! to the same modifier group for StumpWM,
! because StumpWM matches that modifier group.
!
! The Xserver starts with "ISO_Level3_Shift" assigned
! to a non-existent button for this buttonboard,
! but that is desired for this circumstance.
!
add mod2 = Mode_switch ISO_Level3_Shift
!
#xmodmap review
! A comment is a whole line that begins with !.
!
! Each keycode line has up to eight possible keysyms,
! recognized as four distinct groups.
!
! Group one:
! default Shift
!
! Group two:
! Mode_switch Mode_switch + Shift
!
! Group three:
! ISO_Level3_Shift ISO_Level3_Shift + Shift
!
! Group four is probably something to do with
! ISO_Level5_Shift.
!
! The = must have a space before and after it.
! Skip a position with NoSymbol, or when that fails
! try VoidSymbol.
! The X Window System protocol is limited to F1-F35.
!
! Non-accented letters can be referenced as is.
! Numbers can be referenced as is or by name.
! Punctuation is referenced by name.
!
! Any symbol as Unicode is U and its hexadecimal number
! from U0020 (space) and up.
! Help from xmodmap is with "-h":
! xmodmap -h
!
! View proposed changes without changing with "-n":
! xmodmap -n xmodmap-compact,apple-a1243.html
!
! View without blank lines or comments, with grep:
! grep -v '^$\|^!' xmodmap-compact,apple-a1243.html
! Apply with the "xmodmap" program in the console:
! xmodmap xmodmap-compact,apple-a1243.html
!
! Or, for StumpWM within its "init.lisp":
! (run-shell-command "xmodmap xmodmap-compact,apple-a1243.html")
!
#StumpWM and the X Window System
! The X Window System protocol, Chapter 5,
! states "Mode_switch" is for group 2.
! The CLX library has "xlib:keycode->keysym"
! which expects a keysym index from 0 to 6,
! according to the error it gives when beyond.
!
! Group 1 is the default group and has indexes 0 and 1,
! with the second index for when the Shift modifier
! is active.
! Group 2 is for when the "Mode_switch" is active
! and has indexes 2 and 3. The "ISO_Group_Shift"
! is an alias for "Mode_switch", so either name works.
! Group 3 is for when the "ISO_Level3_Shift" is active
! and has indexes 4 and 5.
! StumpWM favors "ISO_Level3_Shift" and equates it
! with the traditional AltGr/Compose button,
! and with group 2. However, it also matches
! with the modifier group mask, which allows it
! to work when added to the same modifier group
! as "Mode_switch".
! See "input.lisp" for "code-state->key" at 511-528,
! which references "*modifiers*"
! which is set by "get-modifier-map" at 800-834.
!
! Need "Mode_switch" (or its alias) for the button
! that is held for programs abiding the X11 protocol.
! Need "ISO_Level3_Shift" (erroneously) added
! to the same modifier group for StumpWM,
! because StumpWM matches that modifier group.
!
#test
! Testing lock for Mode_switch. Delete when done.
! So far, no search results for Mode_switch locking.
!
! No result with urxvt or StumpWM
! for ISO_Lock assigned to separate button.
!keycode 37 = ISO_Lock
!add mod3 = ISO_Lock
!
! No result with urxvt or StumpWM
! for ISO_Group_Lock assigned to separate button.
!keycode 37 = ISO_Group_Lock
!add mod3 = ISO_Group_Lock
! Testing latch for Shift: "ISO_Level2_Latch".
! Failed for urxvt and StumpWM prompts.
!
!keycode 37 = ISO_Level2_Latch
!add mod3 = ISO_Level2_Latch
! So far, no access to group 3.
!
! The virtual terminal urxvt works with "Mode_switch".
!
! However, urxvt fails with "ISO_Level3_Shift".
! Tested by ensuring modifier groups were cleared
! and Mode_switch was separated from ISO_Level3_Shift.
!
!add mod2 = Mode_switch
! The labeled backslash/bar button, above Return.
!keycode 51 = backslash bar comma period equal plus minus
! The left Control button.
!keycode 37 = ISO_Level3_Shift
!add mod3 = ISO_Level3_Shift
!!The "ISO_Level3_Lock" is what (erroneously) works
! with StumpWM prompts. However, StumpWM flickers
! the prompt (indicating an error) when that button
! is typed unless it was added to a modifier group.
! Nonetheless, it works either way.
!!It also works to add the button to the same
! modifier group as "ISO_Level3_Shift".
!
!keycode 66 = ISO_Level3_Lock
!add mod2 = ISO_Level3_Lock
! Testing for "ISO_Level3_Latch" with StumpWM.
! Potential replacement for "shifting".
!
! Worked fine.
!
!keycode 37 = ISO_Level3_Latch
!add mod3 = ISO_Level3_Latch
! Testing ISO_Level3_Shift. Delete when done.
!
! So far, no result from urxvt for Level3. Look for
! another program for further testing.
!
!add mod2 = Mode_switch
! The labeled backslash/bar button, above Return.
!keycode 51 = backslash bar comma period equal plus minus
! The left Control button.
!keycode 37 = ISO_Level3_Shift
!add mod3 = ISO_Level3_Shift
!